Not traditionally used in heating homes, flat panel radiant heaters are used to heat objects via radiant heat transfer. These radiant heaters have traditionally been used in a variety of industries and applications, such as space heating, drying, curing, and water evaporation. More recently, these heating systems are also gaining popularity in home heating applications as well.

Radiant heaters use different types of emitter surfaces. Choices include: quartz, high-temperature glass, stainless steel, and ceramic tiles. These are all materials that are easily and efficiently used in home applications such as flooring, countertops, and towel racks. Because these items are easily turned into emitter surfaces for radiant heat, they can easily and beautifully be incorporated into home heating applications such as heated floors, walls, and towel racks.

To find out about radiant heaters for your home, check with the folks at warmzone.com. They have a complete product catalog of radiant heating solutions that can accommodate almost any application or budget.

Radiant Heaters Tip: radiant heaters a great way to efficiently heat a home, while maximizing your home’s beauty, but they are very cost effective and easy to install. 

When replacing a home heating system, there are a lot of questions that people have in regards to new home heating systems.  Here is a questions that was recently asked.

Q: My 1,200 square foot home used to be heated by a furnace from 1949 that ran at 25,000 BTU. Recently I changed the system to a newer, 7,000 BTU system. I thought this newer heater would be more efficient, but I find that it takes much longer to heat the house than the older system did. Is there something wrong with my furnace or do I need one that has a higher BTU?

A: It’s a good idea to replace old heating systems with newer, more efficient models. These new models can work just as well or better than old systems, but they do work differently. Where old furnaces could be turned on and heat the house within a matter of minutes, new heating systems can take longer. If you want your home to be warm at a certain time, set the heat to go on about 45 minutes prior to that.

Another important factor is whether your home is “weather-tight.” Make sure all doors and windows are properly sealed. If not, you may be losing heat at the same rate your heating system is producing it. Check with a heating contractor who can tell you whether the new unit is sized correctly for your home’s square footage.

Upon hearing the words, “What can Brown do for You? ®” an immediate vision comes to mind of a large, brown delivery truck with the name UPS emblazoned on each side. United Parcel Service has done an incredible job to bring their name to the forefront in the package-delivery market.  The same might be said regarding “The Golden Arches ®,” McDonald’s famous advertising ploy.  Most highly-successful businesses are easily recognized by a catchy slogan or an eye-catching symbol.

We at Warmzone want to be known in the radiant heat arena as the company that will do everything possible to “just make sense” of what might be a confusing array of possibilities for consumers who are seeking information on alternative heating sources.

Why are such vast numbers seeking an alternative radiant heating source ?

Questar Gas Company, included the following message with January’s fuel bill mailing:  “As you have seen, natural gas bills this winter are significantly higher than last year.  Even with all the news about higher natural gas prices, reality doesn’t set in until your bill is opened.”  Unless customers have been oblivious to drastic increases in fuel costs over the past two months, this was somewhat of an understatement.  More than just reality has set in upon consumers!  Caught somewhere in the middle of paying a huge fuel bill and taking a sick child to see a doctor, people are taking a stand against such increases. 

President Bush has encouraged our nation to look for alternative sources as we have become “addicted to oil.” In his state of the union address on January 31, 2006 he announced the Advanced Energy Initiative, a 22% increase in clean-energy research at the Department of Energy, “to push for breakthroughs in two vital areas. To change how we power our homes and offices, we will invest more in zero-emission coal-fired plants, revolutionary solar and wind technologies, and clean, safe nuclear energy.”  Quoting once more from the Questar message: “As you can see, prices on the open market are volatile and have increased to record highs this year both nationally and locally.” 

Volatile, skyrocketing, record high fuel costs provide reasons aplenty for so many people to turn to Warmzone.com for guidance in finding the best-possible radiant heat system for their needs.  Consumers are finding themselves backed into a corner and are looking for an efficient, comfortable alternative.  That just makes sense!

With our commitment to researching the best options for radiant heat and assessing each job individually, our research and design team is prepared to design each project with the ideal system to meet the needs of our customers at the best available prices.

Warmzone is a different kind of company.  Unlike a manufacturer, we do not favor one system over another.  We acknowledge the fact that there are dozens of brands and types of radiant systems that offer unique qualities, but no one system is the answer for every project.  We take great interest in your project goals, requirements and budget and then provide you with a quote for the best system available to complete your project.  We may suggest using an electric, hydronic or a combination of these technologies.  There are clear advantages and disadvantages to each system and technology.  We will explain why we prefer one system over another for your particular project.  At Warmzone.com, you can expect simple, honest explanations for our suggestions to you. 

Customer service is at the top of our priority list.  As with “Brown” or the “Golden Arches,” we would be nothing without you, the consumer.  We are committed to helping people install the latest in innovative radiant heat systems by providing:
            1.  High quality materials
            2.  Installation packages that simplify the work.
            3.  Design assistance
            4.  Installation advice and support.
            5.  The latest ideas in energy efficiency and alternative energy.
We are not satisfied until you are satisfied.  That, of course, makes perfect sense!

Radiant heat systems are constantly evolving – which can be a challenge when it comes to deciding which is the best system for your project.  You can be assured that Warmzone will consider every system and then offer you the best technology for your project.

Most of the systems we design and sell can easily be installed by any plumbing and heating professional or general contractor.  But if you cannot find either professional in your area, our products can be installed by any reasonably-competent handyman.  Custom design and engineering packages are also available to assure that you are getting off on the right foot with your heating investment. These plans take the guess work out of the installation and become a road map for your system for future reference or to pass on to the next home owner.  

We welcome your inquiries and are prepared to help you with your radiant heat decisions.   Warmzone is the only company matching individual heating projects to solutions that make sense among the wide variety of available choices.  We’re not “brown,” nor are we “gold,” but we are leading out to assure customers make the right choice in the ever-increasing radiant heating market. 

Visit us online at www.warmzone.com or speak with one of our representatives by calling us directly at 1.888.488.WARM

© 2006 Warmzone Media.  “What Can Brown Do for You?” is a registered trademark of United Parcel Service of America, Inc. “The Golden Arches” is a registered trademark of McDonald's Corporation. Additional copyrights and trademarks are held by their respective owners.

Danfoss offers a myriad of cables for all kinds of projects, but figuring out the differences can be pretty tricky. I won’t go into technical details here, rather go over some basic differences that will help you choose which cable to use for which project.

All of the Danfoss products give you the option of choosing between individual cable in lengths (it comes on a roll) or in woven mats, which has the cable rows pre-spaced and makes installation much quicker and easier. The only difficulty with the radiant mats is that it works best with rectangular areas; however, the mat can be cut to accommodate corners and custom layouts. (Just don't cut the heat cable!) If you have a complicated, odd shaped area to heat, you may be better off with installing the individual heating cable.

Radiant Heaters Tip: Radiant energy is totally pure radiation and is absorbed by an object without physical contact with the heat source or by heating the surrounding air, as is the case with convective, forced air systems.

Even though it’s now Springtime (and forecasted high energy bills), homebuilders, househunters, and home renovators alike are looking for energy-efficient heating options for houses.  In fact, as builders and homeowners look for new ways to add value to homes in a weak housing market, they often look for upgrades that will add value and efficiency to their homes, which will help them sell.  We say they need look no further than radiant heaters for their ideal home heating solution.

In a nutshell, radiant heaters are the most efficient form of heat available in today’s market. Significantly less operating time is required to attain and maintain the desired warmth compared to furnaces and other, traditional methods of heating, which keeps operational costs to a minimum.

High efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home. Combined with a well-insulated home, these radiant heater systems can quickly warm your home and then shut down or wait idle for long periods of time before being called upon by the thermostat to operate.

Radiant Heaters Tip:  Being more environmentally friendly doesn’t have to involve major renovations. Many people waste a lot of energy by not sealing cracks, doors and windows. Checking to make sure a home’s insulation is in good shape and replacing it if it’s not is another good surefire way to stop, prevent, and reverse energy waste. 

Why Settle When you can Customize?

Finding a Radiant Heating Solution as Unique as You Are

As temperatures plummet and heat bills skyrocket, consumers everywhere are turning to radiant heating systems. As the most affordable and customizable option out there, radiant heating is quickly making a name for itself as a titan in the heating market.

So radiant heat is the latest and greatest, but what exactly is so great about it and what can it do for you? One word: customization.

When it comes to radiant heating, the possibilities are endless. No matter what you want or where you want it, Warmzone can design a radiant heating system completely customized for your lifestyle, and it’s as easy as 1,2,3.

1. Choose

The first step of your radiant heating revolution is choosing the type of radiant heat you want.

There’s no limit to what radiant heating can do. Whether you’re looking to warm up your home or prevent snow and ice buildup on your property, there’s a radiant heating option that’s sure to fit your needs.

Indoor Radiant Heating
Turn any room into a cozy paradise with radiant floor heating. Radiant heating can go under virtually any surface, including tile, carpet, wood, etc. Put it in your bathroom, your kitchen, your living room—anywhere you need heat. Each room, or zone, can be controlled with its own thermostat. Given the flexibility and outstanding effectiveness of radiant heated floors, it is the most affordable way to keep your house perfectly warm without racking up the electricity bill.

Outdoor Radiant Heating
You can also enjoy the benefits of radiant heating outdoors. Radiant snow melting systems keep your property safe by preventing snow and ice buildup. You can choose one or all of the following options to make your life a little easier in the harsh winter months:

• Radiant heated driveways
• Heated sidewalks
• Roof deicing and gutter melt
• Pipe tracing

2. Design

Once you decide which radiant heating options are right for you, the Warmzone team will help you design a customized plan of action. We realize that your radiant heating system isn’t the same as the next customer’s, so we work diligently with you to come up with a radiant heating system tailor made to your needs.

Once we assess your project’s requirements, our team will design a custom CAD drawing of your radiant heating system telling you exactly what you get, where you’ll get it, and how much it will cost you. We’ll keep you involved in every step of the process to make sure that your custom radiant heating system exceeds your expectations.

When we’ve got your customized radiant heating system designed, we’ll make sure you have everything you need for a quick and easy installation. If you’re not comfortable doing it yourself, we’ve got a list of contractors ready to bring your radiant heating plans to fruition.

3. Enjoy

Because we help you with the planning and design process, you’re only job is to sit back, relax, and enjoy your custom radiant heating solution. Let your heated floors warm your home evenly and efficiently. Sit back and watch from the warmth of your living room as your radiant heated driveway does the shoveling for you. And sleep in peace knowing that your gutters and pipes are safe from nasty and potentially devastating snow and ice buildup.

Why settle for an out of the box heating solution? Let us help you customize a radiant heating system that meets your needs, fits your budget, and keeps you and your family warm and safe. 

If you’ve been researching home heating systems, chances are your head is spinning right about now.  It’s no wonder! The number of types of radiant heaters available for residences or businesses could make anyone dizzy in no time at all. There’s really a lot of selection for homeowners to choose from. Today we’ll discuss the electric cable heating system kind of radiant heaters. Electric cable heating systems are gaining popularity in as radiant heaters and are ideal for heating smaller areas (10-300 square feet) like bathrooms, kitchens, and sun rooms. These systems are comprised of a thermostat and a heating cable. On some systems, the cable is be shipped as a large spool of cable. These systems are oftentimes less expensive, and give you the ability to space the cable how you want and customize a layout that will heat every square inch of your floor. Other systems have the cable attached to a plastic mesh or tape to create a mat to maintain its proper spacing.

Every available cable system is equally effective, so when determining which radiant heater system to purchase, you should look at the warranty of the product, along with the ease of installation. Some cables must be embedded in a separate layer of concrete or mortar, whereas other systems can simply be installed in the thinset.

Radiant Heaters Tip: When heating smaller areas with a radiant heater, it is next to impossible to beat the simplicity and price of an electric cable heating system.